Iridium Arc Bar Pro 1215 IP65 12x15W RGBW LED User Manual page 15

CCT-In this menu, you can choose the brightness you desired.
1. Press "ENTER" and then press "UP" or "DOWN" to "CCT".
2. Press "ENTER" you can chooose from "2700K" to "8000K" as you need.
SET UP-In this menu, you can adjust the values of the function.
1. Press "ENTER" and then press "UP" or "DOWN" to "SET UP".
2. Press "ENTER" and there has 6 options,then press "UP" or "DOWN" to choose the
value you desired as below:
1) IR - You can press "ON" or "OFF" to choose whether you need to controll by this
mode.
2) Dimmer All - You can adjust the brightness of colors.
3) Wihte Balace - You can select "RED" "GREEN" "BLUE" "WHITE" you need.
4) Key Lock - You can choose "5s" or "OFF" to make the Key Lock turn on or off.
5) Display - You can choose "ON" or "30s" to make the position of the light screen.
6) Max temp - You can set the your desired Max working temperature of the light with
passcode in this menu.When the working temperature beyond max temperature of
default settings, the color of letter "Temp XX" will show the color from white to
yellow.Meanwhile, the light will adjust the working temperature automatically.
INFORMATION-In this menu, you can learn about the information of
RDM,software,hardware and working time of the light.
1.Press "ENTER" and then press "UP" or "DOWN" to "INFORMATION".
2.Press "ENTER" and you can see 3 items as below:
1) RDM - It shows RDM information.
2) Hardware - It shows the Hardware information.
3) Software - It shows the Software information.
4) Working time - It shows the working time information.
FACTORY RESET-In this menu, you can reset all the value of the system.
1. Press "ENTER" and then press "UP" or "DOWN" to "FACTORY RESET".
2. Press "ENTER" and enter the passcode to reset all the values of the system.
WIRELESS-In this menu,you can set the Wireless signal.
1. Press "ENTER" and then press "UP" or "DOWN" to "WIRELESS".
2. Press "ENTER" and then choose "ON" or "OFF" to set the Wireless signal."ON" is
turn on the signal and "OFF" is turn off the signal.
14