Table of Contents
Advertisement
DMX MODE-In this menu,you can connect several pieces of lights with DMX
cable and control them with the control console.
Press "ENTER" and then press "UP" or "DOWN" to "Address" or "DMX Channel" and
press "ENTER".
1) "XXX" will be showed in "Address", "XXX" means the Address 001-512. You can
press "UP" or "DOWN"to select the address you desired.
2) "Channel [xx]" will be showed in "DMX Channels", "XX" means 5 kinds of DMX
Channels Modes. You can press "UP" or "DOWN" to select the Channel Mode you
desired.
DIMMER CURVE-In this menu,you can choose the mode you desired.
1. Press "ENTER" and then press "UP" or "DOWN" to "Dimmer Curve" to choose as
below
modes.
2. Press "ENTER" you can see 4 items as below:
1) Standard
2) Stage/TV
3) Architec
4) Theatre
DMX STATE-In this menu,you can choose the DMX signal you desired.
1. Press "ENTER" and then press "UP" or "DOWN" to "DMX STATE".
2. Press "ENTER" and you can choose "Blackout" or "DMX Hold"；"Blackout" means
cut off the DMX signal and "DMX Hold" means connect DMX signal.
SLAVE MODE-In this menu, you can choose one light as the MASTER light and
other lights in SLAVE Mode will run follow the MASTER light.
1. Press "ENTER" and then press "UP" or "DOWN" to "SLAVE Mode".
2. Press "ENTER" and "SLAVE" will be showed, then press "ENTER" to choose.
AUTO MODE-In this menu, you can choose your desired AUTO Mode and
adjust the running speed.
1. Press "ENTER" and then press "UP" or "DOWN" to "AUTO MODE".
2. Press "ENTER" you can see 2 items as below:
1) SPEED - It provides "01-31" for you choose.
2) AUTO MODE - It provides "AUTO 1- AUTO 13" for you choose.
STATIC COLOR-In this menu,you can choose the modes you need.
1. Press "ENTER" and then press "UP" or "DOWN" to "AUTO MODE".
2. Press "ENTER" you can see 6 items as below:
1) RED
2) GREEN
3) BLUE
4) WHITE
5) COLOR - You can choose "1-63" in this menu.
6) STROBE - You can choose "0-20" in this menu.
13
Advertisement
Table of Contents
