Advertisement
Available languages
Available languages
FIG. 4: PLAYERS ASSEMBLY
9. Slide the Player Rods (#16-18) through the bushings of one side of the Side Aprons (#1)
in the order shown in FIG.4.
NOTE:
The Player Rods have a hole at their end where the Handles (#10) will go.
10. Place a Foam Bumper (#9), a Rod Washer (#8), either 2,3 or 5 Players (#19 and #20) and
then place another Rod Washer (#8) and another Foam Bumper (#9) onto the other side
of the Side Player Rod. See FIG.4A.
Players of the same team color should have Handles (#10) on the same side, and each team's
NOTE:
players should be facing their opponent.
11. Now insert the Player Rods through the bushings on the other side of the Aprons (#1) (at
the other side of the table).
12. Attach the Players to the rod with a Screw (#21). The screws need to be secured into each
player rod. See FIG.4B.
FIG. 4
17
16
18
16
8
9
19
18
17
16
17
1
FIG. 4 A
17
9
21
6
ORDER OF PLAYERS
(Overhead View - Table upside down)
= BLACK
8
FIG. 4 B
19
17
16
17
18
18
17
16
17
Advertisement
