Advertisement
Available languages
Available languages
ASSEMBLY INSTRUCTIONS
1. Find a clean, level place to begin the assembly of your Soccer Table. The table will be
assembled upside down and then turned over onto its legs. This is a heavy table and turning it
over will require at least two strong adults.
2. Remove all of the parts from the box and verify that you have all of the listed parts as shown
on the Parts List Page. Carefully cut or tear the four carton corners so that the bottom of the
box can serve as your work surface.
FIG. 1: PLAYFIELD ASSEMBLY
3. Align Side Aprons (#1) and then slide the Playfield (#4), with the graphic facing down, into the
grooves of the Side Aprons (#1).
FIG. 1
1
FIG. 2: END APRON ASSEMBLY
4. Attach the End Aprons (#2) to the Side Aprons (#1) using four Screws (#13) per End Apron.
5. Place the Support Braces (#5) on the Playfield (#4) and attach them to the Side Aprons (#1)
using two Screws (#12) per Brace.
FIG. 2
2
13
4
4
28
1
5
4
1A
1
27
2
4
1
12
12
Advertisement
