Installation Instructions; Installation Of The Indoor Unit - Hermes MONACO Series User Manual

INSTALLATION INSTRUCTIONS

1 Placement of the indoor unit.
Keep the air inlet duct and the plug away from the obstructions.
Maximum distance between indoor and outdoor unit should not be more than 5m.
Wall mounting must be reliable to withstand the weight of the device and any impacts.
Avoid exposure to the direct sunlight.
Location for easy outflow of condensate and for easy connection with an outdoor unit.
Keep away from the fluorescent lamps, this may affect the operation of the remote control.
Keep the unit at a distance of not less than 1 m from the TV, radio and other household appliances.
2 Placement of the outdoor unit
Wall mounting must be reliable to withstand the weight of the device and any impacts.
It is recommended to select place with good ventilation, low dust and away from rain and direct sunlight.
A place where the air is freely blown from the outdoor unit and the noise will not inconvenience your
neighbors.
There must be no obstructions near the outdoor unit.
Avoid places where leakage of flammable gases is possible.

INSTALLATION OF THE INDOOR UNIT

1 Mounting of the fixing plate and wall drilling
Mounting of the fixing plate
Fixing plate must be attached to the structural part of the wall.
Note:
Holes in the solid surface must be secured safely to protect the fixing plate from the impacts.
When using the expanding bolts, two holes (11x20 or 11x26) should be at a distance of 450mm from each
other.
• Wall drilling
NOTE:
Make sure that holes are marked correctly, and then drill holes in the wall.