Remote Controller - Hermes MONACO Series User Manual

REMOTE CONTROLLER

OPERATION DISPLAY
It displays the current
settings.
DISPLAY button
Press it once to stop the indoor
unit displaying and press again
to make it display.
SLEEP button
Please see ?sleep mode ?.
TEMPERATURE
ADJUSTMENT buttons
Press it once, the setting tempera-
-ture decreases by 1 .The range of
setting temperature is 16-31 .
FAN SPEED button
Press it to change the fan speed
in the order of low-medium-high
( ).
AUTO
TEMPERATURE
ADJUSTMENT buttons
Press it once, the setting tem-
-perature increases by 1 .
ON/OFF button
Turns unit ON/OFF.
ELECTRIC-HEAT button
Please see ?electric-heat mode
LIGHT-WAVE button
Light-wave series only.
NOTICE:
HEAT mode is not applied to c
Only electric-heat series contains ELECTRIC HEATING
Please aim the signal ejecting window of the remote controller at the signal
receiving window of the indoor unit.
Signal ejecting window
It sends signals to the indoor unit.
SLEEP DISPLAY TIMER
-auto-low
FAN SPEED
AUX LIGHT
-HEAT -WAVE
?.
ool only type
UP&DOWN SWING button
Only apply to unit contains this function.
LEFT&RIGHT SWING button
Press this button , the swing
louvers will swing horizontally ,
the letter
displayed on the display panel .
Press this button again to stop
VERTICAL
swinging. If you want the swing
louvers swing again, press
HORIZONTAL this button until the remote
controller display
OPERATION
MODE
Press it to select operation mode:
AUTO
TURBO
TEMP
Press it to set the timer setting
I/O
IONIZER
CLEAN
Press it to initiate turbo function.
PLASMA FRESH
AIR
Ionizer series only.
Fresh air series only.
Press this button for 3 seconds the unit
will start clean function when it is on off
condition and set cool or dry mode before.
.
? SWING ? will be
? SWING ?.
OPERATION
MODE button
COOL
FAN DRY
HEAT
TIMER button
.
TURBO button
I NIZER button O
FRESH AIR button
CLEAN & PLASMA button
mode .