Playback Mode - Minox DSC Instruction Manual

Playback mode

Viewing images or videos on the monitor
The images or video clips
stored on your camera can
be viewed on the monitor in-
tegrated in the fl ash module.
To do this, connect the DSC
fl ash module to your DSC as
described above and switch the monitor on.
Activate the Playback mode by turning the mode
dial to the corresponding position. The monitor
of the connected fl ash module now displays the
-symbol.
Press the Up or Down button to page through
your saved images or video clips.
Press the shutter release to start a selected video
clip. Press the shutter release again to stop the
playback.
40
Viewing details (only photos)
The zoom function allows you to view details of
your images.
When you are view-
ing an image press the
shutter release to en-
ter the Playback menu.
Select Zoom and press
the shutter release to confi rm this selection.
Pressing the Up or Down button enables you to
zoom in or zoom out. Press the shutter release
again to view the individual image details in
square sections. With the Up or Down button
you can select and view the individual details of
the image. Press the shutter release a third time
to exit the Zoom mode.
Playback
Zoom
4 Thumbnails
9 Thumbnails
Slide Show