Table of Contents
Advertisement
Package Contents
Many accessories are included with the Built-In AIT in the N8151-53 Built-In AIT. Verify the
packed contents with the part list given below and ensure that all the components and parts are
present. Also, check that each item is undamaged. If a component or part is missing or damaged,
contact your dealer.
N8151-53
Cleaning cartridge
Instructions on handling
the AIT unit
Important
•
Locking parts contained in the package or box will be required when removing the Built-In AIT
for transportation. Store them securely.
•
Depending on the environment connected to, some parts may not be usable. However, when
the environment is changed, these parts may become usable, therefore store them securely.
•
To ensure that you do not lose the device driver, make sure that you back up the supplied
floppy disk. Once you do, store the master disk in a safe location and use the copy.
Screws (4)
* Only use when
installing the device
on the basic
processing unit.
Instruction manual
(this User's Guide)
The brackets (2) are shipped screwed (4).
Floppy disk
(Device driver)
Labels (for 3.5" device)
Safety Consideration 69
IDE Cable
Advertisement
Chapters
Table of Contents
