Supplied Accessories; Attaching The Stand Unit; Inserting The Batteries - Sharp AQUOS 4T-C60DL1X Initial Setup Manual

A. Supplied accessories
1 Remote control unit (m 1) 2 "AAA" size battery (m 2)
4T-C60DL1X 4T-C60DK1X
L R
5 Stand base
4T-C70DL1X
L 5 Stand base
B. Inserting the batteries
Remote control unit
1 2
• Place batteries with their terminals
corresponding to the (k) and
(l) indications in the battery
compartment.
3 Initial setup guide
4 Warranty certifi cate
L R
5 Stand base Screws
6
R 6 Screws
3
2 "AAA" size battery
Recycle the battery
C. Attaching the stand unit
■
4T-C60DK1X
6 Screws
5 Stand base R
■ ■
4T-C70DL1X
6 Screws
Step Insert the stand assembly into the openings on the bottom of the Monitor.
Step Insert and tighten the screws into the holes on the bottom / rear of the Monitor.
NOTE
• This drawings used throughout this manual are based on the 4T-C60DL1X.
- 7 - 8
EN EN
■
4T-C60DL1X
6 Screws 6 Screws
Soft cushion
5 Stand base L 5 Stand base R
Soft cushion
2
Stand base R Stand base L
5 5
6 Screws
6 Screws
Soft cushion
5 Stand base L