Important Safety Precautions - Sharp AQUOS 4T-C60DL1X Initial Setup Manual

Introduction
Precautions For Daily Use
Observe the following items
Maintenance of the cabinet
• When cleaning the cabinet, use a soft cloth (made of cotton, oss, etc.) to clean gently.
• Do not use a dry or damp rag mixed with chemicals, as this could cause the ingredients of the cabinet body to
deteriorate or crack.
• Be careful not to use an abrasive cloth for cleaning or clean with excessive force, as this could scratch the surface
of the cabinet.
• If the cabinet is greatly soiled, clean with a soft cloth (made of cotton, oss, etc.) soaked with a small amount of
diluted neutral detergent and wrung out, and then clean with a soft dry cloth.
• Solvents such as benzene or thinner could cause the cabinet to deteriorate, or make its coating come off. Therefore
do not use such solvents to clean the cabinet.
• Because plasticizer is included in the plastics, deterioration or the coating peeling off could occur when the cabinet
comes into contact with some substances. Therefore keep it away from volatile substances such as insecticide. In
addition, do not let it come into contact with objects made of rubber, resin, etc. for a long time.
Maintenance of the LCD panel
• Before cleaning the LCD panel, be sure to turn off the Monitor set and unplug the power cord from the outlet.
• When cleaning the LCD panel, use a dry and soft cloth (made of cotton, oss, etc.) to clean the surface of the LCD
panel gently. For protecting the LCD panel, do not clean with a dirty cloth, detergent, or a dry or damp rag mixed
with chemicals, as this could cause peeling of the panel surface.
• Be careful not to clean with an abrasive cloth or with excessive force, as this could cause the panel surface to be
scratched.
• If the LCD panel is greatly soiled, clean it gently with a soft cloth (made of cotton, oss, etc.) soaked with a small
amount of water (Do not clean with excessive force, so as to avoid the scratch of the panel surface).
• If dust sticks on the surface of the LCD panel, clean the panel with a commercially available cleaning brush (anti-
static brush).
Introduction (Continued)

Important safety precautions

Caring for the cabinet
• Use a soft cloth (cotton, annel, etc.) and gently
wipe the surface of the cabinet.
• Using a chemical cloth (wet/dry sheet type cloth,
etc.) may deform the components of the main unit
cabinet or cause cracking.
• Wiping with a hard cloth or using strong force may
scratch the surface of the cabinet.
• If the cabinet is very dirty, wipe with a soft cloth
(cotton, annel, etc.) soaked in neutral detergent
diluted with water and thoroughly wrung out, and
then wipe with a soft dry cloth.
• The cabinet is primarily made of plastic. Avoid using
benzene, thinner, and other solvents, as these may
deform the cabinet and cause the paint to peel off.
• Do not apply insecticides or other volatile liquids.
• Also, do not allow the cabinet to remain in contact
with rubber or vinyl products for a long period of
time. Plasticizers inside the plastic may cause the
cabinet to deform and cause the paint to peel off.
• When relocating the product
placed on a cart, it must be
moved with utmost care. Sudden
stops, excessive force and
uneven oor surface can cause
the product to fall from the cart.
• Water and moisture — Do not
use the product near water, such
as bathtub, washbasin, kitchen
sink, laundry tub, swimming pool
and in a wet basement.
- 3 - 4
EN EN
Caring for the front panel
• Turn off the main power and
unplug the AC cord from the wall
outlet before handling.
• Gently wipe the surface of the
front panel with a soft cloth
(cotton, annel, etc.).
• To protect the front panel, do not
use a dirty cloth, liquid cleaners,
or a chemical cloth (wet/dry
sheet type cloth, etc.). This may
damage the surface of the front
panel.
• Wiping with a hard cloth or using
strong force may scratch the
surface of the front panel.
• Use a soft damp cloth to gently
wipe the front panel when it is
really dirty (It may scratch the
surface of the front panel when
wiped strongly).
• If the front panel is dusty, use an
anti-static brush, which is
commercially available, to clean
it.
Do not install the Monitor in a location in
which it will be subject to water drops such
as underneath an air conditioning unit or in
the vicinity of a humidifier
• Water drops falling onto the
Monitor and water entering
inside it may result in re, electric
shock, or malfunctions.
More than 1m.
We recommend that you
install the Monitor at least 1 m
away from the outlet of an air
conditioner.