Ricardo 069858637592 User Care And Instruction Manual

Ricardo 069858637592 User Care And Instruction Manual

Culinary torch

Advertisement

CULINARY TORCH
USER CARE AND
INSTRUCTION MANUAL
Thank you for purchasing the RICARDO culinary
torch. Before using this product, please read the user
care and instruction manual carefully.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 069858637592 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ricardo 069858637592

  • Page 1 CULINARY TORCH USER CARE AND INSTRUCTION MANUAL Thank you for purchasing the RICARDO culinary torch. Before using this product, please read the user care and instruction manual carefully.
  • Page 2 SAFETY WARNINGS ::: Keep the torch and gas container out of reach of children. ::: The torch does not contain any butane gas when purchased. Please follow the gas filling instructions in this manual to make the torch operational. ::: When the torch is filled with butane, content is under pressure.
  • Page 3 PARTS IDENTIFICATION Product might vary from diagram. 1. Flame type button 4. Flame intensity lever 2. Safety lock 5. Continuous flame lock 3. Ignition button 6. Filling valve (under torch) 7. Flame guard...
  • Page 4 GAS FILLING AND REFILLING CAUTION: Only use high quality butane gas. Before filling the torch, read the instructions printed on the gas cartridge. Always fill the torch in a well ventilated area or outdoors, far from other persons. Do not smoke while filling or refilling.
  • Page 5 IGNITION Before starting, move flame intensity lever (4) to ‘‘-’’ position by sliding it to the extreme left. ::: Push down the safety lock (2) until it clicks in place. ::: Push the ignition button (3) and the flame will ignite instantly. If the ignition button is not fully pushed to the end, the safety lock will immediately click-up and it will be...
  • Page 6 CONTINUOUS FLAME CAUTION: Use extreme caution when the flame is locked. The flame will be continuous and will not turn off until the continuous flame lock is manually disengaged. ::: After ignition, slide up the continuous flame lock (5). ::: Release the ignition button (3) and the flame will remain on.
  • Page 7 FLAME INTENSITY ::: Adjust the flame length during use by moving the intensity lever (4). Sliding towards the ‘‘+’’ symbol will lengthen flame, sliding towards the ‘‘-’’ symbol will shorten flame. NOTE: For your safety, work on an inclination of 45° from the working surface.
  • Page 8 TURNING OFF There are two methods: 1- If the continuous flame is not activated, simply release the ignition button (3). 2- If the continuous flame is activated, slide down the continuous flame lock (5). Before storing, make sure the flame is switched off and the unit is completely cooled down.

Table of Contents