Barpa NORMA 600 Series Assembly Instructions

In this first step you will need the top cover (5), the
bottom plate (8) and 2 x frame (6). Put the two parts of
frame ready to assemble this part like picture with 16 x
bolt M8*12 (C) and 16 x flange nut M8 (D);
With the cabinet in the vertical, assemble the mounting
angle (4) with 16 x bolt M6*12 (B) in the horizontal sides
of the cabinet;
SERIES NORMA 600 - 15U UP TO 33U
28x 32x
M5x10bolt M6x12bolt M8x12 bolt
Safety warning – Do not climb on, rock,
shake your rack. Only someone with good
mechanical skill and who has experience
should install this rack. Never exceed the
maximum load capacity. If you didn't
understood this
please contact us by info@barpa.eu
1
1
With the cable entry panel (9) and with the castors (10),
assemble in the bottom plate with 24 x bolt M5*10 (A);
Grab the 19'' rails (3) in the vertical and mount with 16 x
bolt M6*12 (B);
16x 16x 4x
M8 flange key M12 adjustable
nut
instructions manual
2
2
4x
feet
IM_01_rev.1