Table of Contents
Advertisement
24. REPLACEMENT PARTS LIST
Note:
1. RTL (Retention Time Limited)
The marking (RTL) indicates that the Retention Time is limited for
this item.
After the discontinuation of this assembly in production, the item
will continue to be available for a specific period of time. The
retention period of availability depends on the type of assembly
and the laws governing parts and product retention.
At the end of this period, the assembly will no longer be available.
2. Important safety notice
Components identified by the
characteristics important for safety. When replacing any of these
components, only use specified manufacture's parts.
3. The S mark indicates service standard parts and may differ from
production parts.
4. RESISTORS & CAPACITORS
Unless otherwise specified;
All resistors are in ohms ( ) K=1000 , M=1000k
All capacitors are in MICRO FARADS (
*Type & Wattage of Resistor
mark indicates special
F) P=
50
F
Advertisement
Table of Contents
