LAWO ruby User Manual page 34

6.4 The Central Module(s)
Every control surface includes one Central Module running in full mode. If your surface has additional Central
Modules, then these must run in monitor mode.
6.4.1 The Central Module
Configuration Example
1 Rotary Controls, Small MF Keys & OLEDs
The four sets of rotary controls, small MF Keys and OLED displays interact with the 12 Function Buttons (3).
When none of the Function Buttons (3) are active, the controls have a default functionality that is programed by
the configuration.
If a Function Button (3) is pressed, then the controls can be used to adjust the relevant parameters. For example,
to control EQ parameters on a MIC source, first press ACCESS on the MIC fader strip; then press the EQ
Function Button on the Central Module - you can now use the four sets of controls to adjust the EQ parameters.
The parameter value and button functions are shown in the OLED.
2 MF Keys 45 & 46
These two MF Keys are programed by the configuration. On consoles with more than one layer, they usually
provide global layer switching.
34/78 Version: 6.6.0/1
6. Operation
MF Key Layout
ruby User Manual