Advertisement
Available languages
Available languages
Grip the appliance as lightly as possible (while still keeping safe control of it). Let the ap-
-
pliance do the work.
To reduce vibration, maintain the appliance as explained in this manual. If any abnormal
-
vibration occurs, stop use immediately.
TECHNICAL DATA
Max. Cutting Diameter
Min. Cutting Diameter
Max. Cutting Length
Min. Cutting Length
Blade Size
Maximum RPM for Blade
Power Source
PTO Drive Ratio
PTO Output Speed
Wheel dimension
Sound pressure level (without load), LpA
Sound pressure level (loaded), LpA
Always wear hearing protector!
The specified values are emission values and therefore should not at the same time be
reliable working site values. Although there is a correlation between emission and
immission levels, it cannot unfailingly be derived if extra precautions need to be taken or
not. Factors, which influence the actual available immission value on working site, include
the peculiarties of working area, other sources of noise, e.g. the number of machines and
other adjoining processes. The allowed working values could vary from country to
country. However, the information should qualify the user to be able to make an
estimation of the dangers and risks.
This product fulfils the requirements of quality class HA 2807.
Ø270 mm
Ø25 mm
1000 mm
200 mm
Ø700 x 3.2 mm
1440 rpm
PTO Drive
3.3:1
540 rpm
200 x 44 mm
95.6 dB(A), K = 4 dB
107.4 dB(A), K = 4 dB
23
Advertisement
