Advertisement
2. SPECIFICATION
DIAMETER: . . . . . . . . . . . . . . . . . . . . . . . .24"
INPUT VOLTAGE: . . . . . . . . . . . . . . . . . 230V
MOTOR POWER: . . . . . . . . . . . . 210 - 280W
SPEED RANGE: . . . . . . . . . . .900 - 1100rpm
WEIGHT: . . . . . . . . . . . . . . . . . . . . . . . . 20kg
3. OPERATION
3.1.
FAN OPERATION.
WARNING! Ensure you read, understand and apply safety instructions before using the fan.
3.1.1. The fan is easily transportable by means of the wheels provided. Lift by the handle on the main body of the fan on the side opposite
the wheels and manoeuvre the fan into position. Ensure that there is nothing in front of the fan that may be disturbed when the fan is
switched on.
3.1.2. Check that the speed control box situated in the recess in the rear grille of the fan is set to "oFF". Uncoil the power lead from its
stowage position and plug into the mains power supply. Ensure that the power lead is not stretched or positioned in such a way as to
cause a hazard. Switch the power on.
3.1.3. Turn the fan on by rotating the control knob from "oFF" to "1". If a greater air flow is required turn the knob to the "2 or 3" setting.
3.1.4. Adjust the direction of air flow by tilting the fan up or down within its frame or moving the whole unit from side to side.
3.1.5. When you have finished using the fan ensure you turn the speed control switch to "0" (off) and disconnect the fan from mains power.
3.1.6. Recoil the lead onto the stowage hooks situated within the recess in the rear grille.
4. MAINTENANCE
WARNING! Ensure the fan is disconnected from the mains power supply before attempting any of the following:
4.1.
Use a soft, damp cloth to clean the body of the fan.
DO NOT splash water onto the fan and never allow water to drip onto the motor housing.
DO NOT use solvents, petroleum, paint thinner or other chemicals to clean the fan.
4.2.
If it becomes necessary to clean the fan blades or inside the fan body, remove the front grille by undoing the 6 screws. Wipe with a
damp cloth only. Replace the grille and refix using the screws and rectangular washers.
4.3.
Should the motor, speed control box or the power lead require service or maintenance, contact your local service agent.
4.4.
When not in use, place the fan in its original box, or cover the fan to protect from dust, and store in a safe, dry, childproof location.
5. SPARE PARTS
ITEM
PART NO.
1
HVD24.01
2
HVD24.02
3
HVD24.03
6
HVD24.06
7
HVD24.07
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
DESCRIPTION
REAR GRILLE
SWITCH
MoToR
FRonT GRILLE
BLADE
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
Issue:
1
Date:
13/1/03
ITEM
PART NO.
10
HVD24.10
11
HVD24.11
16
HVD24.16
19
HVD24.19
01284 757500
01284 703534
DESCRIPTION
PLASTIC PLUG
WHEEL
HAnDLE
SWITCH KnoB
www.sealey.co.uk
Web
sales@sealey.co.uk
email
HVD24
Issue: 5 - 31/08/11
Advertisement
