Amplicomms BigTel 200 User Manual page 30

P S T
REPARING THE ICHERHEITSHINWEISE ELEPHONE
Connecting the base station
a
Attention: Position the base station at least 1 m away from
other electronic devices, otherwise there is a risk of mutual distur-
bance.
Connect the base station as illustrated in the diagram. For rea-
sons of safety, only use the power adapter plug and telephone
connection line supplied.
Mains power outlet
Telephone line socket
a
Attention: Use only the power adapter plug supplied with the
base station ! You should ensure access to the power adapter
plug is not obstructed by furniture or such.
Connecting the charging station
Connect the charging station to a mains power outlet.
a
Attention: Use only the power adapter plug supplied with the
charging station ! You should ensure access to the power adapter
plug is not obstructed by furniture or such.
2
Only applies to telephone sets with at least two handsets, see
"Checking the package content", page 27.
28
2
Helpline UK 0844 800 6503
(See page 45 for costs and hours of operation)
Inserting the batteries
Open the battery compartment cover.
Put in the batteries.
Close the battery compartment cover.
a
Attention: Use only type AAA NiMH rechargeable batteries,
1.2 V, 600 mAh. Never use normal batteries / primary cell batter-
ies. Observe the correct polarity!
Charging the batteries
☞
Before the handset is used for the first time, insert it in the
base station / charging station for at least 16 hours.
The handset warms up during the charging process. This is
normal and does not represent a risk. Use only the adapter
plug unit provided for the charging station. The battery status is
shown on the display. When the battery capacity is nearly
exhausted, the battery symbol (
will appear in the display).
You should now put the handset for charging into the base sta-
tion or the charging station.
) will flash and "Battery Low"