Sliding The Appliance Into The Installation Space - Miele Independence F1801Vi Operating And Installation Manual

Installing the appliance
Sliding the appliance into the
installation space
^ Unscrew the plinth.
^ To protect the corners of the
installation space, attach the
supplied edge protector a on both
sides with adhesive tape.
^ Plug the appliance into the power
outlet b.
48
In the case of side-by-side
installations, a separate outlet must
be used for each appliance.
^ To prevent the power cord from
becoming caught:
Tie a piece of string to the middle of
the power cord and feed it forward
under the appliance. When sliding
the appliance in, pull the cable
forward c.
^ Carefully slide the appliance into the
space until the height-adjustable
wheels interlock with the anti-tip
brackets.
If resistance is felt when attempting to
slide the appliance into the installation
niche - for example, because the floor
is uneven,
^ Turn the rear adjustable wheels
slightly outward (see "Aligning the
appliance"), then push the appliance
in.
Be careful not to damage the power
cord attached to the floor.
^ Remove the edge protector a.