Custom Door Panels; Installation Options - Miele Independence F1801Vi Operating And Installation Manual

Custom door panels

This appliance is compatible with all
styles and designs of kitchen cabinetry.
The total weight of the decorative panel
must not exceed the following:
K 18X1 Vi . . . . . . . . . . . . 46 lbs (21 kg)
K 19X1 Vi . . . . . . . . . . . . 66 lbs (30 kg)

Installation options

There are many different installation
options. You are limited only by the
design of the kitchen.
The door hinge cannot be
exchanged.
Single column
The appliance can be installed at any
preferred location in the kitchen.
However, be sure the door will open
and close properly in the chosen
location.
Side-by-side
This appliance can be installed
"side-by-side" with another
fridge/freezer using a "Merging Kit".
The "Merging Kit" can be obtained from
Miele.
Contact Miele or your dealer for
specific information about which
combinations will work with your
appliance.
. . . without partition
If the appliances are installed directly
next to each other (without a partition),
they will need to be attached together.
A heating mat must also be installed.
This will help avoid condensation and
prevent damage.
For instructions on how to attach the
appliances and install the heating mat,
please refer to the instructions included
in the "Merging Kit" available from
Miele.
Installation
37