Warranty ITECH warrants that the product will be free from defects in material and workmanship under normal use for a period of one ( 1) year from the date of delivery ( except those described in the Limitation of Warranty below).
Chapter1 IT-E155 Introduction IT-M3900B/IT-M3900C/IT-M3900D/IT-M3800 series 1U models and IT-M7723 are compatible with a standard 19-inch cabinet. Befor installation, ITECH provides with a specially designed rack IT-E155 series, this series rack include IT-E155A/IT-E155B/IT-E155C. User can select different model according to requirement.
Page 9
IT-E155 User Manual IT-E155C The IT-E155C rack is a decentralized mounting kit for ITECH cabinets or similar ITECH cabinets with brackets and mounting holes on the side of the cabinet. When installing an instrument into a 19" cabinet and no tray is available, the IT-E155C model bracket kit can be selected to secure the rear end of the IT-M series instrument to the bracket on the side of the cabinet.
Chapter2 Mounting Instrument 2.1 Preparation When the IT-E155 rack is used, it is necessary to remove the side footing of the instrument. Use a screwdriver to loosen the two screws for fixing the side footing, and remove the side footing. As shown in the figure below, remove six side footings at the front, rear, left and right of the instrument.
Page 11
IT-E155B kit at the rear of the instruments to fix the rear parts of the instruments on the cabinet. If the cabinet is an ITECH cabinet or similar ITECH cabinets with brackets and mounting holes on the side of the cabinet. You can also use the IT-E155C kit to fix the rear end of the instrument to the side bracket of the cabinet.
Need help?
Do you have a question about the IT-E155 and is the answer not in the manual?
Questions and answers