Miele T1302 Technical Information
Washer/dryer stand
Hide thumbs
Also See for T1302:
- Technical information (86 pages) ,
- Operating instructions manual (40 pages) ,
- Product dimensions (12 pages)
Related Manuals for Miele T1302
Summary of Contents for Miele T1302
-
Page 1: Technical Information
Technical Information Date: June 7, 2004 To: Technical Service Subject: Washer/Dryer Stand W1113, 1119, 1203, 1213, 1215 T1302, 1303, 1322C, 1323C, 1329C, 1403, 1405... - Page 2 Remove the rear panel screws (Torx T20) and remove the rear panel, see Fig. 3 Leveling The stands must be leveled prior to installing the washer and dryer. Place the stands into their locations see Fig4. Adjust the feet until the stands are level. Tighten the counter nuts.
- Page 3 Install the dryer stand rear panel using the 4 Torx screws provided see Fig. 3. • Place the dryer into its final position being sure to line up the studs of the rubber bushings with the holes on the dryer stand.