1. Manuals
  2. Brands
  3. WattBox Manuals
  4. Power Strips
  5. WB-800I-IPVM-6
  6. Quick start manual

WattBox WB-800I-IPVM-6 Quick Start Manual

Hide thumbs Also See for WB-800I-IPVM-6:
Table of Contents

Advertisement

Quick Links

Download this manual
WB-800I-IPVM-6
220~240V~
WB-800I-IPVM-6
50 / 60 Hz 10A
Quick Start Guide

Advertisement

Table of Contents
loading

Related Manuals for WattBox WB-800I-IPVM-6

Summary of Contents for WattBox WB-800I-IPVM-6

  • Page 1 WB-800I-IPVM-6 220~240V~ WB-800I-IPVM-6 50 / 60 Hz 10A Quick Start Guide...

  • Page 2: Important Safety Instructions

    Important Safety Instructions Read and observe the following safety points at all times. Notice For indoor user only. Internal components are not sealed form the environment. The device can only be used in a fixed location such as a telecommunication centre, or a dedicated computer room. When you install the device, ensure that the protective earthing connection of the socket-outlet is verified by a skilled person.

  • Page 3: Package Contents

    Package Contents This package contains: Removable, region-specific power cord 220~240V~ 50 / 60 Hz 10A Rack ears (2 short, 2 long) Power strip #10 × 12.5mm clip screws (2) Rack ear screws (8) Nuts (2) Mounting clips (2) IEC sleeve (1)

  • Page 4: Front Panel

    A. Power Inlet: For a 3-prong IEC power cord. B. Circuit Breaker Reset Button: Press this button to restart the WattBox after an overload. C. AC Power Switch: Press to manually toggle the outlets on or off. This glows with an amber light when the unit is powered.
  • Page 5 Rack Ear Mounting Options The long rack ears allow you to mount the unit at varying depths within the rack, as shown here. Recessed Surface mounting mounting...
  • Page 6 Rack Ear Mounting Options The rack ears can be used to mount the power strip in several arrangements other than on the rack. You can mount it under a counter or shelf (below left), on top of a table (below right), or against the wall (not shown). With each of these options, you can choose to mount it flush to the surface (bottom) or displaced (top).
  • Page 7 Rack Mount with Clips This can be mounted vertically on the outside of one rail of a rack. Using the nuts and screws provided, install the mounting brackets (with the clips oriented as shown at right) on the outside of one rack rail. Place the clips 76mm (3") –...
  • Page 8 Wall Mount with Clips This unit can also be mounted on a wall, either vertically or horizontally. Draw a level or plumb line. Using wall anchors or other appropriate hardware (not provided), attach the mounting brackets (clips oriented as shown) centered on the level or plumb line, so that the clips are 76mm (3") –...

  • Page 9: Connections And Setup

    If you desire OvrC connectivity, plug a network cable from your router or switch into the network port. Plug in the IEC power cord. To prevent an accidental disconnect, insert the included IEC sleeve before plugging in the power cord. WB-800I-IPVM-6 Web Browser Access...
  • Page 10 Claiming the WattBox on OvrC The WB-800I has many powerful features that are accessed through OvrC, our award-winning remote management tool. If you are not familiar with OvrC, visit snp1.co/ovrc to learn more. Finishing Setup with OvrC 1. Ensure the WB-800I is connected to the internet via your router or network switch.

  • Page 11: Led Indicators

    All sites / IP addresses are communicating with the WattBox Internet Green (Flashing) At least one (not all) sites / IP addresses are communicating with the WattBox None of the sites / IP addresses are communicating with the WattBox. Green (Solid)

  • Page 12: Troubleshooting

    WattBox is turned on. WattBox is sharing AC power with Connect WattBox to a dedicated outlet. equipment that is not properly Unplug different components from WattBox one at a time to see if the Speakers emit grounded. noise stops.

  • Page 13: Specifications

    Specifications Outlet Type IEC 60320 C13 Number of Outlets Number of IP Controllable Outlets Line Voltage 220–240VAC, 50/60Hz AC Input Connection IEC 60320 C14 Fuse Rating 10A, 250VAC Power Rating 2400W Voltage Protection Rating L-N 1.1kV, L-E 2.1kV, N-E 1.8kV Joule Rating 1260J Surge Component...
  • Page 14 Outlet Filter Operating Temperature Range -10 °C to 40 °C (−14 °F to 104 °F) Certifications CE Certified, RCM Certified, CB Safety Certified Dimensions, Product (WxHxD) 440mm (17.32″) × 44mm (1.73″) × 80mm (3.15″) Dimensions, Gift Box (WxHxD) 506mm (19.92″) × 153mm (6.02″) × 75mm (2.95″) Dimensions 440mm 220~240V~...

  • Page 15: Logging In To The Web Interface

    You need to enter the username and password to access the web interface. The default entries are below; be sure to change these to maintain proper security (and log them below). Default Custom Username wattbox Password wattbox Note: The new password cannot exceed 15 characters.
  • Page 16 (formerly known as Wirepath Home Systems, LLC), in the United States and/or other countries. 4Store, 4Sight, Control4, Control4 My Home, SnapAV and WattBox are also registered trademarks or trademarks of Snap One, LLC. Other names and brands may be claimed as the property of their respective owners.

Table of Contents