Pitsco Education FLO User Manual

Visualization tunnel

FLO

Visualization Tunnel

User Guide

Cautionary and Warning Statements

• This unit is designed and intended for educational purposes only.

• Use only under the direct supervision of an adult who has read and understood the instructions provided

in this user guide.

• Read warnings on packaging and in manual carefully.

• Safety glasses are required.

• Always exercise caution when using sharp tools.

42292 V0116

Table of Contents

Need help?

Do you have a question about the FLO and is the answer not in the manual?

Page 1 Visualization Tunnel User Guide Cautionary and Warning Statements • This unit is designed and intended for educational purposes only. • Use only under the direct supervision of an adult who has read and understood the instructions provided in this user guide. •...
Page 2 Do not press on the heating element in the middle of the hole. You could damage the heating element. 3. Place the nozzle on the fog generator (Figure 3). Figure 1 Figure 2 Figure 3 FLO Visualization Tunnel User Guide 42292 V0116...
Page 3 Find an object you want to test, insert a dowel rod into it, cut the dowel rod to an appropriate length to fit in the FLO Tunnel, and insert the dowel rod into a magnetic base mount. 1. Pull the right side of the FLO Tunnel out (Figure 6). Take out the circle platform in the bottom of the FLO Tunnel (Figure 7).
Page 4 4. Push the On button for the FLO Tunnel and fog generator on the control box. Place the nozzle of the fog generator on the right side of the FLO Tunnel and press the On button on the fog generator. Test the flow of the air around the object by rotating the gear on the right side of the FLO Tunnel (Figures 10 and 11).