Table of Contents
Advertisement
1. Select the first channel (i.e. Ch. 7)
2. Press and hold the DW button until you hear a beep.
3. Using the channel selector, select the second channel.
4. Press and hold the DW button until you hear it beep again.
5. On the LCD you will see the two channels that you have programmed
flashing back and forth.
M3-
Functions as memory channel 3 and scan. To start scanning other channels.
press the M3 button. To stop scanning, push the M3 button again.
M4
- Functions as memory channel 4 and the mode button. This button switches
the radio between CB and weather radio mode.
M5-
Functions as memory channel 5 and the lock button. To lock the radio just
press the button until it beeps. To unlock the radio repeat the same procedure
9. Dual Function "F" Button –
memory channel for the M1-M5 buttons. To program a channel follow these steps:
1.
Turn your radio on and make sure you are in CB Mode. (AM)
2.
Select the channel you want to program (i.e. Channel 4)
3.
Press the "F" button.
4.
Press and hold one of the"M" buttons until you hear a beep. You have now
programmed a channel into the memory.
5.
To program other "M" buttons repeat this process.
http://www.midlandradio.com
The "F" button is used to program the
- 10 -
Hide quick links:
Advertisement
Table of Contents
