Introduction; Overview; Applications - Microtek ADF-600EL Installation And Operation Manual

1 Introduction

Overview

The Automatic Document Feeder (ADF-600L / ADF-600EL) is a companion sheet
feeder for Microtek's ScanMaker series scanners. It allows automatic scanning of up
to 25 sheets, with dimension of the document as large as 8 1/2" x 14". Sheets to be
scanned are fed from a stack in the Automatic Document Feeder's input tray, guided
past the scanner's image sensor, and placed in the feeder's output tray.
Automatic Document Feeder (ADF) mounts onto the scanner in place of a document
cover, using the original document guide holes of your scanner. The feeder is
preloaded by spring plungers so that it can be lowered into position for auto-feed
scanning or lifted off to allow use of the flatbed.

Applications

The Automatic Document Feeder is a must for high-volume document processing
with the ScanMaker series scanners. It increases operating convenience and efficiency
in multi-page scanning as well as OCR applications.
Automatic Document Feeder Installation and Operation Manual 1