Toro Groundsmaster 4300-D Operator's Manual page 17

The Toro Company, 8111 Lyndale Ave. South, Bloomington, MN, USA declares that the following unit(s)
conform(s) to the directives listed, when installed in accordance with the accompanying instructions onto certain
Toro models as indicated on the relevant Declarations of Conformity.
Model No. Serial No.
30845 310000001 and Up
Relevant technical documentation has been compiled as required per Part B of Annex VII of 2006/42/EC.
We will undertake to transmit, in response to requests by national authorities, relevant information on this partly
completed machinery. The method of transmission shall be electronic transmittal.
This machinery shall not be put into service until incorporated into approved Toro models as indicated on the
associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in
conformity with all relevant Directives.
Certified:
John Heckel
Engineering Director
8111 Lyndale Ave. South
Bloomington, MN 55420, USA
August 9, 2020
Declaration of Incorporation
Product Description
22-inch Rotary Cutting Unit,
Groundsmaster 4300-D
Traction Unit
Invoice Description
22 INCH CONTOUR PLUS
DECK ASM
General Description
22in Contour Plus Deck
Authorized Representative:
Marcel Dutrieux
Manager European Product Integrity
Toro Europe NV
Nijverheidsstraat 5
2260 Oevel
Belgium
Directive
2006/42/EC