Using The Advanced Image Enhancer Dialog Box - Microtek ScanMaker 35T Plus User Manual

Using the Advanced Image Enhancer dialog box

When you click on any of the image-enhancement tools in the Settings window, the
Advanced Image Enhancer (AIE) dialog box appears. In this box, you can do the
following:
1
2
3
4
3
Click on any
button here to use
another image-
enhancement tool.
The dialog box will
change
accordingly.
48 Microtek Scanner User's Guide (PC version)
This is where you select the
(Note: For definition of a scan job, see the Scan Job section of the Reference.) If you
have multiple scan jobs, you can switch among the various jobs, and the thumbnails
will change accordingly to show the selected scan job.
Switching to a new scan job while using the AIE dialog box will make any
changes to the currently selected scan job permanent. This cannot be undone
even by selecting the Cancel button.
Example: Assume you have two scan jobs, Scan Job 1 and Scan Job 2. If you
applied a filter (through the Filters tool) to Scan Job 1, and then switch to Scan
Job 2, the filter will be applied to Scan Job 1 even though you did not click OK.
To undo the filter, you will need to use the Reset button. See next page on how
to use the action buttons for more details.
These are the thumbnails
the "before" version — which shows the effects of the last saved settings values. The
right thumbnail is the "after" version — which shows the effects of the new settings
added in the AIE.
To select another image-enhancement
the vertical toolbar on the right side of the dialog box.
Click on an action button
scan job to which image enhancement will be applied.
of the image captured by your scanner. The left thumbnail is
tool, click on any of the buttons displayed in
to achieve a particular effect. (See next page for more details.)
Choose your
1
scan job here
Click on a button
4
for an action
Left thumbnail:
2
Before
enhancements
Right thumbnail:
After
enhancements