Page 1
EZ1_MS85_ML209 Instructions 12-20-22 - Cover Page EZ1/MS85/ML209 Consists of: Mount Body EZ1/MB16/209 VESA Bracket EZ1/MA1 Displays up to 134-197 lbs (61-90 kg) VESA Mounting: 200 x 200 - 800 x 670 Salamander EZ-Touch Manual Lift Wall Mounts - EZ1/MS85/ML209 501-764 [12.22] page 1 of 9...
Page 2
8 x 10mm (10x) 303-531- M8 x 65mm (4x) m (10x) M8 x 12mm (10x) 400-171 - M6 Hex Key mm (10x) 400-171 - M6 Hex Key Salamander EZ-Touch Manual Lift Wall Mounts - EZ1/MS85/ML209 501-764 [12.22] page 2 of 9...
Never adjust the inner springs! Springs should be unattached before disposal of the EZ-Touch. Sort the EZ-Touch, the accessories and the packaging for the environmentally friendly recycling. Salamander EZ-Touch Manual Lift Wall Mounts - EZ1/MS85/ML209 501-764 [12.22] page 3 of 9...
Page 4
(minimum of 16” (405 mm) apart) at the desired location using a stud finder device. MASONRY: a minimum width of 16” (405 mm) is required between fasteners. Salamander EZ-Touch Manual Lift Wall Mounts - EZ1/MS85/ML209 501-764 [12.22] page 4 of 9...
Page 5
Mounting bracket level to wall Unpack the EZ-Touch Take the wall bracket out (A) of the box. Note the slotted/slanted holes for level wall mounting. LOCK SCREW HOLE 11.8" 16” Salamander EZ-Touch Manual Lift Wall Mounts - EZ1/MS85/ML209 501-764 [12.22] page 5 of 9...
Page 6
Make sure screws are unlocked Lift the mount onto bracket ools needed Salamander EZ-Touch Manual Lift Wall Mounts - EZ1/MS85/ML209 501-764 [12.22] page 6 of 9...
Page 7
Lock mount with screws Level vertically with feet at the bottom Salamander EZ-Touch Manual Lift Wall Mounts - EZ1/MS85/ML209 501-764 [12.22] page 7 of 9...
Page 8
M6 x 12mm (10x) or M8 x 12mm (10x) M8 Split Washer (4x) 303-531 (4x) M8 x 10mm (4x) Hang display onto horizontal bracket and level Salamander EZ-Touch Manual Lift Wall Mounts - EZ1/MS85/ML209 501-764 [12.22] page 8 of 9...
LIMITED WARRANTY FOR COMMERCIAL VIDEO DISPLAY STANDS AND MOUNTS Salamander warrants against manufacturing defects for two (2) years from the date of purchase. Salamander will repair or replace, at our option, any product defective in materials or craftsmanship. Batteries are not covered by the warranty.