Optimizing The Focus And Brightness For A Touched Position - Panasonic LUMIX DC-ZS200D Owner's Manual For Advanced Features

Optimizing the focus and brightness for a touched position

Recording mode:
→ [Custom] →
→ [AF+AE]
1
Touch the subject you want to optimize the brightness
for
• The AF area setting screen appears.
• The brightness optimization position is displayed on the center of
the AF area. The position follows the movement of the AF area.
• [Metering Mode] is set to [
[Touch AE].
2
Touch [Set]
• The AF area with the same function as [
• If you touch [
When the background has become too bright, etc., the
brightness contrast with the background can be adjusted by
compensating the exposure.
●
When recording with the Touch Shutter, the focus and brightness are optimized for the touched
position before recording takes place.
●
At the edge of the screen, the metering may be affected by the brightness around the touched
location.
●
The [AF+AE] does not function in the following cases:
• When using the Digital Zoom
• When recording using [4K Live Cropping]
95
Focus, Brightness (Exposure) and Color tone Settings
[Operation] → [Touch Settings] → [Touch AF]
(→91)
], which is used exclusively for the
] (touch [ ] when [
Taking pictures with Auto Focus
] is displayed on the touched position.
] is set), the setting of [AF+AE] is canceled.
Reset Reset Set Set