[Monitor Luminance]
Sets the monitor brightness according to the ambient light level.
(Auto)
(Mode 1)
(Mode 2)
(Mode 3)
●
Some subjects may look different from their actual appearance, but the recorded picture will not
be affected.
●
[
] returns to ordinary brightness if there is no operation for 30 seconds when recording. (Press
any button or touch the screen to make the screen brighter again.)
●
Setting [
] or [
●
Cannot select [
●
When the AC adaptor (optional) and DC coupler (optional) are used, the initial setting is [
[m/ft]
Select how distance is displayed, in Ft or M.
[Eye Sensor]
[Sensitivity]
[LVF/Monitor Switch]
[USB Mode]
Select communication method for when connecting camera to a computer or printer with
USB connection cable (supplied).
[Select on connection]
[PC(Storage)]
[PictBridge(PTP)]
200
The brightness is adjusted automatically depending on how bright it is
around the camera.
The brightness is increased.
The brightness is standard.
The brightness is decreased.
] reduces the operating time.
] during playback.
Use this setting to set the sensitivity of the eye sensor.
Use this setting to switch the display between the viewfinder and monitor.
[LVF/MON AUTO] (Automatic switching between viewfinder and monitor) /
[LVF] (Viewfinder display) / [MON] (Monitor display)
• After the display is switched using the [LVF] button, the setting of [LVF/
Monitor Switch] will also change.
Select communication method each time you connect to a
computer or PictBridge-compatible printer.
Select when connecting to a computer.
Select when connecting to a PictBridge-compatible printer.
Using Menu Functions
Menu list
→
[Setup]
].