11.0 Troubleshooting - Redback A 4506 Operating Manual

11.0 Troubleshooting

Mains led does not come on.
Check that the mains lead is connected.
Check that the AC fuse is installed.
Unit does not display battery voltage.
Check that you have connected a lead from the battery to the terminals labelled Battery Voltage.
Unit will not charge battery.
Check connections to (To battery) terminals and to the battery.
Make sure the Isolate breaker hasn't been reset.
Load does not power up when mains fails.
Check connections to (To load) terminals and to the load.
Make sure the Isolate breaker hasn't been reset.
Redback® Proudly Made In Australia
7