EC20 / EC50 RedBack_Charger EC20-EC50_ 2016 8:33 08 Contents Denotes a potentially dangerous situation. Non-observance of this warning may result in injury or damage Symbols used in this manual ..... 2 to property. Symbols on the power tool ......2...
Page 3
Intended use The battery charger EC20 / EC50 is designed for charging batteries of types EP20 (40 V/2.0 Ah), – EP40 (40 V/4.0 Ah),– EP60 (40 V/6.0 Ah).
EC20 / EC50 RedBack_Charger EC20-EC50_ 2016 8:33 08 Use only original batteries with the Safety instructions for voltage indicated on the rating plate of L-ion batteries your electric power tool. If other batteries are used, e.g. imitations reconditioned batteries or third-party products, there is ...
EC20 / EC50 RedBack_Charger EC20-EC50_ 2016 8:33 08 lights red Charger is ready to use. flashs green Battery is charging. Charging process lights green finished. Maintenance charging. Displays of LED: See “Charging process”. Slot for battery flashs red – Battery is too hot Contacts or too cold.
EC20 / EC50 RedBack_Charger EC20-EC50_ 2016 8:33 08 Charging voltage Charging current Charging time EP20 (depending on charge state) EP40 EP60 Operating temperature °C 0–40 Weight (without battery) Protection class II / Instructions for use CAUTION! – Never charge batteries at temperatures below 0°C or above 40°C.
EC20 / EC50 RedBack_Charger EC20-EC50_ 2016 8:33 08 again. Replace the battery or have it checked in a professional workshop. – If this fault message is also displayed with a different battery, then there is a fault with the charger. Have the charger...
EC20 / EC50 RedBack_Charger EC20-EC50_ 2016 8:33 08 Guarantee Disposal information WARNING! Render redundant power tools unusable: This product has been manufactured to the highest quality standards. When a new mains operated power tool by – product is purchased, it is guaranteed a 24- removing the power cord, month manufacturer’s warranty which...