Samsung PS42D51SX/XEC Service Manual page 74

11-3-4 Fixing the TV panel to the wall attachment panel bracket
Remove the 4 screws on the back of the product.
1
Insert the screw
2
• Mount the product on the wall bracket and make sure it is properly fixed to the left and
right plastic hangers.
• Be careful when installing the product on the bracket as fingers can be caught in the holes.
• Make sure the wall bracket is securely fixed to the wall, or the product may not stay in
place after installation.
Tighten the 4 screws in step 2 (plastic
3
hanger + screw
the product.
Samsung Electronics
into the plastic hanger. (See the figure below)
) to the rear holes of
Remove safety pin ( ) and insert the 4
4
product holders into the corresponding
bracket holes ( ). Then place the
product ( ) so that it is firmly fixed to
the bracket. Make sure to reinsert and
tighten the safety pin (
hold the product to the bracket.
PDP
Wall Bracket Wall
Operation Instruction & Installation
) to securely
11-9