Metz SCA 3083-M2 digital Manual page 11

Any cover plate that may still be in place (required
for the standard foot 301 and the SCA 300 adapter)
should be gripped in the centre and withdrawn.
Mounting the adapter on the
mecablitz 54 MZ-3/4
• Open the battery compartment cover.
• Press the coloured unlatching button in the bat-
tery compartment and simultaneously withdraw
the 301 standard foot or SCA adapter. Any cover
plate that may still be in place (required for the
standard foot 301 and SCA 300 adapter) should
be gripped in the centre and withdrawn.
Mounting the adapter on the mecablitz 44 MZ-2
• With adapters of the SCA 3002 system, open the
flap at the back of the adapter.
• Press the retention catch of the mecablitz
against the casing of the flash unit and simulta-
neously withdraw the SCA adapter.
Mounting the stand
Loosen the knurled nut of the adapter. Push the
adapter all the way into the stand and secure with
the knurled nut. If you wish to remove the adapter,
completely unscrew the knurled nut.
With the aid of the stand, the mecablitz can now be
located at any point in the room or mounted on a
tripod.
11