Table of Contents
Advertisement
28 | Français
– Turn the drill unit (44) using the crank handle (4) up-
wards, until the recess is above the uppermost screw
(45).
– Unscrew the upper screw (45) for the left guide rail using
the hex key (4 mm) (25).
– Turn the drill unit (44) all the way up using the crank
handle (4).
– Unscrew the three lower screws (45) for the left guide rail
using the hex key (4 mm) (25).
– Tighten the four screws (46) using the hex key (3 mm)
(25) while turning the drill unit (44) up and down using
the crank handle (4). Adjust the required feed force while
doing so.
– Turn the drill unit all the way up and tighten the three
lower screws (45) for the left guide rail using the hex key
(4 mm) (25).
– Turn the drill unit all the way down and tighten the upper
screw (45) for the left guide rail using the hex key (4 mm)
(25).
Adjusting the laser (see figure F)
To ensure precise drilling, the laser beams must be checked
after intensive use and adjusted as necessary.
– To switch on the laser, push the laser on/off switch (7)
into position "I".
– Unscrew the laser cover (47).
– Slightly undo the screws for the clip (49).
– Move the laser cross right or left by turning the screw
(50) in the appropriate direction.
– Move the laser cross towards or away from the tool by
turning the screw (51) in the appropriate direction.
– Retighten the screws for the clip (49).
– Screw the laser cover (47) back on.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
1 609 92A 4S6 | (10.08.2021)
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.
Do not dispose of power tools along with
household waste.
Only for EU countries:
According to the European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and its implementation
into national law, power tools that are no longer usable must
be collected separately and disposed of in an environment-
ally friendly manner.
Only for United Kingdom:
According to Waste Electrical and Electronic Equipment Reg-
ulations 2013 (2013/3113), power tools that are no longer
usable must be collected separately and disposed of in an
environmentally friendly manner.
Français
Consignes de sécurité
Avertissements de sécurité généraux pour l'outil
électrique
Lire tous les avertissements de sé-
AVERTISSE-
curité, les instructions, les illustra-
MENT
tions et les spécifications fournis
avec cet outil électrique. Ne pas suivre les instructions
énumérées ci-dessous peut provoquer un choc électrique,
un incendie et/ou une blessure sérieuse.
Conserver tous les avertissements et toutes les instruc-
tions pour pouvoir s'y reporter ultérieurement.
Le terme "outil électrique" dans les avertissements fait réfé-
rence à votre outil électrique alimenté par le secteur (avec
cordon d'alimentation) ou votre outil électrique fonctionnant
sur batterie (sans cordon d'alimentation).
Sécurité de la zone de travail
Conserver la zone de travail propre et bien éclairée.
u
Les zones en désordre ou sombres sont propices aux ac-
cidents.
Ne pas faire fonctionner les outils électriques en at-
u
mosphère explosive, par exemple en présence de li-
quides inflammables, de gaz ou de poussières. Les ou-
tils électriques produisent des étincelles qui peuvent en-
flammer les poussières ou les fumées.
Maintenir les enfants et les personnes présentes à
u
l'écart pendant l'utilisation de l'outil électrique. Les
Bosch Power Tools
Advertisement
Table of Contents
