Table of Contents
Advertisement
Physical overview
Pictures bellow are showing the Raven 2 PRO unit. It has one SMA connectors for active GPS antenna, 3
pressure ports (Ptot – total pressure, Pst – static pressure, Pte – total energy compensated pressure from
TEK probe) and a multi-color LED to show the status of the unit. It also has 3 connectors. The micro USB
is used for future updates, settings and flight log download. The 4 pin connector is prepared for future
rd
use (extended bus). JR 3-pin servo input is used to measure normal PWM servo pulse or to transmit 3
party telemetry protocol on it (depends on unit setting). The Raven 2 PRO gets power from USB or JR
connector.
Important: Be careful on polarity when connecting power to the unit. Improper connection can damage
unit! Correct polarization is marked on side of the unit by the servo connector!
extended bus connector
servo connector
micro USB
Raven
- Onboard air-data measuring system for R/C planes with telemetry.
Page 4
2 PRO
Advertisement
Table of Contents
