Install
Telephone base
Plug one end of the
telephone line cord into
a telephone jack or a
DSL filter.
If you have DSL high-speed
Internet service, a DSL filter
(not included) is required.
Route the telephone line
cord through this slot.
Plug the other
end of the
telephone line
cord into the
telephone jack
on the back of
the telephone
base.
Charger
Caution: Use only the power adapter(s) provided with this product. To obtain a
replacement, visit our website at
https://telephones.att.com
1 (866) 288-4268
Plug the power adapter into a power
outlet not controlled by a wall switch.
or call
.
5
Plug the large end of the
telephone base power
adapter into a power
outlet not controlled by
a wall switch.
Route the power
adapter cord through
this slot.
Plug the small end of
the telephone base
power adapter into
the power adapter
jack on the back of the
telephone base.
1 (800) 222-3111
. In Canada, dial