Table of Contents
Advertisement
PRESSURE CLEANER OPERATOR'S MANUAL
UNDERSTANDING EQUIPMENT
120 BAR4023CG-HEC 2
1. Spray gun/Lance assembly - Controls the application of water onto cleaning surface with trigger device.
Includes trigger lock. Allows you to switch between various spray tips.
2. Air filter - Protects the engine by filtering dust and debris out of intake air.
3. Gearbox - Houses reduction gears to reduce shaft speed for pumps.
4. Rubber mounts - isolates motor pump group via rubber feet.
5. Pump - Develops high pressure. Connect the supply hose to the water tank or pump inlet and connect the
high pressure hose to the outlet.
6. Battery - For electric start machines.
7. Unloader - Opens to bypass in an over-pressured system. Pressure is pre-set at the factory.
8. Fuel tap - No fuel tank supplied with this model. Allows you to attach your own fuel source.
9. Nozzles - 0°, 15°, 40° and detergent: for various cleaning applications.
10. Muffler/Exhaust - Reduces noise of the engine and expels heat (CAUTION HOT).
11. Detergent siphoning hose - Used to draw detergent into a low pressure stream. (OPTIONAL EXTRA)
12. High pressure hose - Designed to withstand the pressure created by the pump. Carries water flow to gun.
13. Throttle lever - Adjusts engine speed, set to maximum speed once started.
14. Emergency stop - Immediately shuts off engine when pressed. To release rotate clockwise.
15. Choke - Prepares a cold engine for starting.
16. Ignition switch - Set switch to "On". "Start" for electric starter engagement. Turn to "Off" to shutdown engine.
[NOTE: See petrol engine manual also provided for detailed operation/maintenance & warranty
information.]
13
Advertisement
Table of Contents
