Page 1
Also applies to : 148 202 600 870 www.bargroup.com.au 148 202 600 501 148 202 600 871 Technical data Maximum permissible pressure 310.0 bar / 31.00 MPa Minimum pressure 1.0 MPa Maximum flow rate 45.0 l/min Permanent water temperature 90°C Short term water temperature max.
Spray gun The ST-2600 is designed to be used for professional high-pressure cleaning (cold/hot water). The spray gun housing is made of impact- resistant plastic. The valve housing and connectors are made of anti-corrosion metal. The trigger lever is equipped with a safety latch.
Description of hazard that could result in minor or moderate injury. For your safety This Suttner product is state of the art and complies with generally recognised health and safety regulations. Due to the high pressures and temperatures nonetheless there is the danger of material damage and injury for users and other persons. Please comply with these Operating Instructions at all times and the relevant regulations for liquid jet washers.
Assembly Risk of injury! Please note that high-pressure guns should only be used in conjunction with a lance which is at least 75cm long and which offers sufficient space for your other hand! If the high-pressure system has been used with hot water, allow the equipment to cool down to below 45°C due to the risk of scalding or burning before starting assembly and maintenance work! ...
Please dispose of old equipment in an environmentally friendly manner. Old equipment contains valuable recyclable materials which should be salvaged for recycling. Please therefore dispose of old equipment at suitable collection points. Manufacturer BAR Group Pty Ltd 15 Hudson Place Mulgrave, NSW Australia Tel.
Need help?
Do you have a question about the ST-2600 and is the answer not in the manual?
Questions and answers