Duplicating A Video Tape - Memorex MVT2135B Owner's Manual

DUPLICATING A VIDEO TAPE

If you connect the TV/VCR to another VCR or
Camcorder, you can duplicate a previously recorded
tape. Make all connections before turning on the power.
1
Insert a blank cassette with the erase prevention tab
intact into the TV/VCR.
Insert a previously recorded cassette into the play-
back VCR or Camcorder.
2
Press the INPUT SELECT button
twice to select AUDIO/VIDEO
input position. The "LINE " will
appear on the screen.
3
Press the REC/OTR button on the remote control of
the TV/VCR, then press the PAUSE/STILL button.
4
Press the PLAY Button on the playback VCR, then
press the PAUSE/STILL button.
5
Press the PAUSE/STILL buttons on both units
simultaneously to begin the duplicating process.
NOTES: • It is recommended that the tape speed be set
to the SP mode on the TV/VCR for best result.
• Unauthorized recording of copyrighted
television programs, films, video cassettes
and other materials may infringe the rights of
copyright owners and be contrary to copyright
laws.
5A30401A E P20-Back
CONNECTION TO ANOTHER VCR
LINE
To VIDEO
OUT
CONNECTION TO CAMCORDER
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer's instruc-
tions. A typical camcorder dubbing hookup is shown
below.
Playback
Camcorder
23
Recording TV/VCR
Playback VCR
To AUDIO
OUT
To Video In
Audio/Video Cord (not supplied)
Recording TV/VCR
To AV Jack
To Video/Audio In
Audio/Video Cord (not supplied)
8/20/01, 12:54 PM
To
Audio In
23