Thermaco Big Dipper 51000 Series Manual

Please scan QR code to watch a video tutorial.
1. Scan this QR code to watch a video tutorial.
1. Scan this QR code to watch a video tutorial.
1. Unplug the center module and remove from
Big Dipper tank.
3. Unplug the center module and remove
from Big Dipper tank.
3. Unplug the center module and remove
from Big Dipper tank.
3. Use a Phillips head screwdriver and turn
counter-clockwise to remove (5) bolts. Set
5. Use a Phillips head screwdriver and turn
bolts aside.
counterclockwise to remove (5) bolts. Set
5. Use a Phillips head screwdriver and turn
bolts aside.
counterclockwise to remove (5) bolts. Set
bolts aside.
Thermaco, Inc. • 646 Greensboro St. • Asheboro, N. C. 27204-2548 • Phone (336) 629-4651
Thermaco, Inc. • 646 Greensboro St. • Asheboro, N. C. 27204-2548 • Phone (336) 629-4651
51000 Series
51000 Series
Replacing EECA-115 or EECA-230 Electrical
Enclosure Cover Assembly
Tools required to Replace EECA-115 or
EECA-230 Electrical Enclosure Cover
2. You will need a Phillips head screwdriver
Assembly: Philips head screwdriver, silicone
driver and a replacement EEC (Electrical
(not included).
2. You will need a Phillips head screwdriver
Enclosure Cover).
driver and a replacement EEC (Electrical
Enclosure Cover).
2. There will be (4) bolts on the front and (1) in
the rear.
4. There will be (4) bolts on the front and (1)
in the rear.
4. There will be (4) bolts on the front and (1)
in the rear.
4. Lift the cover over the skimming wheel to
pry open the EECA cover. Pull upwards
6. Lift the skimming wheel cover and start until EECA is completely removed from
prying open the EEC cover. Pull upwards
center module.
6. Lift the skimming wheel cover and start
until EEC is completely removed from
prying open the EEC cover. Pull upwards
center module.
until EEC is completely removed from
center module.
1