Turning Power On/Off; Adjusting The Volume; Preset Equalizer - Memorex MPD8861PLL User Manual

TURNING POWER ON/OFF

1
Press the PLAY/PAUSE (®p)/POWER
ON/ button 1 to turn the unit on. To turn
the unit off, press the STOP ( )/POWER
OFF/ button 2 while in the Stop mode.
The unit will automatically shut off if
stopped (CD Standby) for one minute.

PRESET EQUALIZER

1
While in Play mode, repeatedly press
the PROG./EQ/ ENTER button to
cycle through the preset EQ settings:
NORMAL, CLASSIC, POP, JAZZ and
ROCK.
Radio Sound Through a Home Audio System
By using a home audio connection cable (not included), superb radio sound can
be heard through your home audio system. Before making any connections, turn
off the power to all equipment.
Plug a connection cable (not included) between the LINE OUT jack on the rear of
the CD player and the amplifier's AUX or CD input jack. (Do not connect it to the
amplifier's PHONO jack.)
NOTE: If the radio interferes with TV reception, move the unit away from the TV or
turn off the power to this unit.
CD OPERATION

ADJUSTING THE VOLUME

1
You can adjust the digital volume level from
Minimum "MIN" to Maximum "MAX" by
pressing the VOLUME UP/DOWN buttons.
NOTE: If there is no disc in the CD
compartment or the CD door is open, you
cannot adjust the volume.
HOLD
1
Slide to the ON position to disable the
buttons; "Hold" will briefly appear in the
display. When pressing the buttons on the
CD compartment lid, "Hold" will briefly
appear in the display. Slide to the OFF
position to enable the buttons. For the
HOLD function, only the buttons on the CD
compartment lid and the VOLUME
UP/DOWN buttons will be disabled, not the
other controls/switches.
6
1
1