Page 1
MD6460 User’s Guide PERSONAL COMPACT DISC PLAYER WITH 60 SECOND DIGITAL MOTION PROOF ANTI-SHOCK PROTECTION Before operating this product, please read these instructions completely.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Page 3
INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a res- idential installation.
Page 4
Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
1. DC 4.5V Jack (Rear of Unit) 2. ESP Button 3. Display 4. PROG (Program) Button 5. PLAY/PAUSE (®p)/POWER ON Button 6. HOLD (ON/OFF) Switch 7. Battery Compartment (Under CD Compartment) 8. MODE Button 9. CD Door OPEN Switch 10. CD Compartment 11.
This CD player requires either two (2) “AA” cell batteries (not included) or an AC adapter (not included). BATTERY INSTALLATION The battery indicator ( batteries need replacing. 1. Open the CD compartment, then open the battery compartment door by pressing in on the tab and then lifting it.
BASS BOOST To emphasize the bass, slide the DBBS switch to the ON position. For normal bass, slide the DBBS switch to the OFF position. HOLD Slide to the ON position to disable the buttons; “Hold” will briefly appear in the display.
Page 8
TO PLAY A CD (Standard, CD-R and CD-RW) Open the CD compartment lid by sliding the CD OPEN switch to the right. Gently press a disc, label side up, onto the spindle until it locks in place. Close the CD compartment lid. Insert headphones into the PHONES jack.
CD OPERATION (CONTINUED) 60 SECOND MOTION PROOF ELECTRONIC ANTI-SHOCK SYSTEM This CD player has a built-in Anti-Shock System that cuts down on CD skipping, which is useful when using the CD player in the car or while jogging/walking. Follow the steps below to activate and understand the Anti-Shock System: Open the CD compartment lid by sliding the CD OPEN switch to the right.
Page 10
CD OPERATION (CONTINUED) If the CD player is subject to vibration during playback, the bars will disappear one by one. During the vibration, the music should continue to play the signals stored in the memory until the CD player can read the music data properly from the disc.
Page 11
CD OPERATION (CONTINUED) TO REPEATEDLY PLAY BACK ONE TRACK With a CD inserted, press the PLAY/PAUSE (®p)/POWER ON button to turn the unit on, then select a track using the SKIP/SEARCH o 2 or n 3 button. Press the MODE button ...
INTRO PLAY With a CD inserted, press the PLAY/PAUSE ( button to turn the unit on and press the STOP (I)/POWER OFF button to stop auto playback. Press the MODE button three times; the INTRO indicator will appear in the display. TO CANCEL Intro Play, press the Mode button twice.
TO PROGRAM THE MEMORY (UP TO 24 TRACKS) With inserted, PLAY/PAUSE (®p)/POWER ON button 1 to turn the unit on and press the STOP (I)/POWER OFF button 2 to stop auto playback. Press the PROG button 3; the Track (00), program number (P-01) and PROG indicator will appear in the CD display.
CARE AND MAINTENANCE Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc. to the compact disc label.
If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM Unit will not turn on. Disc will not play. Erratic CD playback. No sound from headphones. ESP not working. CAUSE Batteries inserted incorrectly. Weak or dead batteries.
OR CONTACT CUSTOMER SERVICE AT (954) 660-7100. PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX. FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-800-321-6993.
Page 17
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www.memorexelectronics.com...
Page 18
MD6460 Guía del Usuario REPRODUCTOR DE DISCO COMPACTO PERSONAL CON PROTECCIÓN ANTI- SALTOS DIGITAL DE 60 SEGUNDOS A PRUEBA DE MOVIMIENTOS Antes de operar este producto, sírvase leer este instructivo en su totalidad.
ADVERTENCIA: Para reducir el riesgo de descargas eléctricas no saque la cubierta o la tapa posterior. Allí no se encuentran partes que puedan ser reparadas por el usuario. Lleve su unidad a un Centro de Servicio Autorizado. ADVERTENCIA: La figura de la flecha con forma de rayo dentro de un triángulo está...
Page 20
AVISO DE LA FCC: Este equipo genera o puede usar energía de frecuencia radial. Cualquier cambio o modificación al equipo, puede causar interferencia nociva, a menos que estas modificaciones esten expresamente indicadas en el man- ual de instrucciones. El usuario puede perder el derecho de operar este equipo si efectuara un cambio o modificación no autorizadas.
Page 21
Estimado Cliente: Escoger un fino equipo de sonido como la unidad que usted acaba de comprar es sólo el principio de su placer musical. Ahora es momento de considerar cómo puede usted maximizar la diversión y el entusiasmo que su equipo le ofrece. Este fabricante y el Grupo de Electrónica de Consumo de la Asociación de la Industria Electrónica desean que usted le saque el máximo provecho a su equipo en un nivel seguro.
1. Enchufe de entrada de 4.5V DC z (atrás de la unidad) 2. Botón de ESP 3. Pantalla 4. Botón de PROG (Programa) 5. Botón de TOCAR/PAUSA (®p)/Encendido 6. Interruptor de SOSTENER (encendido/apagado) 7. Compartimiento de pilas (abajo del compartimiento del 8.
Este reproductor de CD requiere dos (2) pilas de celda "AA" (no incluidas) o un adaptador de corriente alterna (no incluido). INSTALACIÓN DE PILAS El indicador de la pila ( pilas están bajas. 1. Abra el compartimiento del CD, luego abra la puerta del compartimiento de la pila haciendo presión en la lengüeta y levantándola.
INCREMENTO DE BAJOS Para enfatizar los bajos, deslice el botón de DBBS a la posición de ON. Para los bajos normales, deslice el interruptor de DBBS a la posición de OFF. SOSTENER Deslice a la posición de ON para desactivar los botones; "Hold" aparecerá brevemente en la pantalla.
REPRODUCIR UN CD (Estándar, CD-R y CD-RW) Abra la tapa del compartimiento del CD deslizando el interruptor de abrir CD a la derecha. Oprima suavemente un disco, con la etiqueta hacia arriba, sobre el eje hasta que se asegure en su lugar. Cierre la tapa del compartimiento del CD.
Page 26
OPERACIÓN DEL CD (CONTINÚA) SISTEMA ELECTRÓNICO ANTI-SALTOS A PRUEBA DE MOVIMIENTOS POR 60 SEGUNDOS Este reproductor de CD tiene integrado un sistema de Anti-Saltos que elimina los saltos en el CD, lo cual es útil cuando se usa el reproductor en el automóvil o mientras trota o corre.
Page 27
OPERACIÓN DEL CD (CONTINÚA) Si el reproductor de CD se somete a vibraciones durante la reproducción, las barras desaparecerán una por una. Durante la vibración, la música debe continuar tocando las señales en la memoria hasta que el reproductor de CD pueda leer adecuadamente del disco con la información de la música.
Page 28
OPERACIÓN DEL CD (CONTINÚA) TOCAR REPETIDAMENTE UNA MISMA PISTA Con un CD insertado, oprima el botón de TOCAR/PAUSA (®p)/ENCENDIDO 1 para encender la unidad y luego seleccione una pista utilizando el botón de BRINCAR/BUSCAR O 2 o N 3 . Oprima una vez el botón de MODO 4 ;...
Page 29
TOCAR LA INTRODUCCIÓN Con un CD insertado, oprima el botón de TOCAR/PAUSA (®p)/ENCENDIDO 1 para encender la unidad y luego oprima el botón de PARO (I)/APAGADO 2 para detener la reproducción automática. Oprima tres veces el botón de MODO 3; en la pantalla aparecerá...
Page 30
PROGRAMAR LA MEMORIA (HASTA 24 PISTAS) Con un CD adentro, oprima el botón de TOCAR/PAUSA (®p)/ENCENDIDO 1 para encender la unidad y luego oprima el botón de PARO ( )/APAGADO 2 para detener la reproducción automática. Oprima el botón de PROG 3; la Pista (00), número de programa (P-01) e indicador de PROG aparecerán en la pantalla del CD.
CUIDADO Y MANTENIMIENTO Cuidado a los discos compactos • Trate el disco con cuidado. Maneje el disco sólo por sus orillas. Nunca permita que sus dedos toquen el lado brilloso y sin impresión del disco. • No pegue cinta adhesiva, calcomanías, etc. sobre la etiqueta del disco compacto.
ISi usted experimenta problemas con esta unidad, verifique la tabla abajo antes de llamar a servicio. SÍNTOMA La unidad no enciende. Disco no toca. No hay sonido en audífonos. ESP no funciona CAUSA Pilas débiles o muertas. Pilas no insertadas correctamente.
O COMUNÍQUESE CON SERVICIO AL CLIENTE AL (954) 660-7100. SÍRVASE GUARDAR LOS MATERIALES DEL EMPAQUE AL MENOS DURANTE 90 DÍAS POR SI ACASO NECESITARA REGRESAR EL PRODUCTO A SU DISTRIBUIDOR O A MEMOREX. PARA OBTENER PARTES Y ACCESORIOS, COMUNÍQUESE CON FOX INTERNATIONAL AL 1-800-321-6993.
Page 34
Memcorp, Inc. Weston, FL Impreso en Hong Kong Visite nuestro sitio web en www.memorexelectronics.com...