IMPORTANT SAFEGUARDS WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED. READ ALL INSTRUCTIONS TO PROTECT AGAINST RISK OF ELECTRICAL SHOCK, DO NOT PUT THE MAIN BODY (MOTOR) IN WATER OR ANY OTHER LIQUID. THIS APPLIANCE IS NOT INTENDED FOR USE BY CHILDREN OR BY PERSONS WITH REDUCED PHYSICAL, SENSORY, OR MENTAL CAPABILITIES, OR LACK OF EXPERIENCE AND KNOWLEDGE.
Before Reading Manual 1. Read ‘Safety Precautions’ (p. 3~5) and use the appliance properly. 2. After reading the manual, keep it in a convenient location for future reference. 3. Do not use it in countries which use a different voltage than 230-240 V. 4.
Safety Precautions Warning Denotes risk of serious injury or death. 01 You should read <Safety Precautions> 02 You should follow <Safety Precautions> 03 Precautions are classified as follows. DO NOT PLUG IN NOR UNPLUG WITH WET HANDS. It may cause electric shock or injury. DO NOT USE OTHER THAN 230-240 V AC.
Page 6
Safety Precautions The following actions can cause serious injury or damage to the appliance. DO NOT RUN THE JUICER WHILE THE CHAMBER SET IS NOT ASSEMBLED It can cause injury, accident, or trouble. PROPERLY. WHEN DETECTING A GAS LEAK, DO NOT INSERT THE POWER CORD INTO THE OUTLET.
Cautions during Operation Information on how to prepare different produce items. Please be aware of any allergies you may have to specific ingredients. Ingredients that can be used under the following guidelines. • For fruits with a pit such as apricots, plums, and peaches, be sure to remove all traces of the pit before juicing.
Parts and Accessories ① Hopper ② ① Upper hopper chute ② Side hopper chute ③ Assembly Guide ③ ① Auger ① Auger Axle ② Auger Seal ② Inner Strainer ① Inner Strainer ② Inner Strainer Binding ② Points ③ Sorbet Strainer ④...
Page 9
Using the vacuum juice container The Sana vacuum juice container allows you to extend the shelf life of juice up to 72 hours, provided it is stored in the refrigerator. For best results, seal the container as soon as possible after juicing.
Component Details / Hopper ① ② ③ ① Upper hopper chute: Use this to insert long and narrow vegetables such as celery and carrots. ② Side hopper chute : Use this to insert cherry tomato, grapes, and diced fruits and vegetables ③...
Page 11
Component Details / Juice Strainer (Black) ① ① Juice strainer wing: Wings for holding the strainer in the chamber. The strainer fits securely into the groove. • Use this to extract juice from most fruits and vegetables. (Use the soft fruit strainer for soft fruit).
Page 12
Component Details / Soft Fruit Strainer ① (Orange) ① Soft fruit strainer wing: Wings for holding the strainer in the chamber. The strainer fits securely into the groove. • Use the soft fruit strainer to extract juice from soft or fibrous fruits. •...
Page 13
Component Details / Sorbet Strainer ① ① Guide bump: When inserting the sorbet strainer, fir the guide bump into the chamber groove. • Used to make smoothies, slushies, and sorbet. • The sorbet strainer is used alone, without the external strainer. •...
Assembling Juice Chamber Set Outer Strainer Outer Strainer Hopper Hopper ⑦ ⑦ Assembly Guide Assembly Guide Chamber Chamber Auger Auger ⑥ ⑥ Fit the wings of the outer strainer (④) to the Auger Seal Auger Seal grooves of the chamber (③). Inner Strainer Inner Strainer ⑤...
Page 15
Assembly Guide with Main Body is on page 16. Inner Strainer Inner Strainer Strainer Strainer Screw Screw Place the inner strainer fit into the outer Place the auger in the assembly from strainer in the chamber. step 2. Match the binding point (⑤) of the inner Make sure the auger seal (⑥) is properly strainer and the wings of the outer strainer inserted in the auger before assembling.
Assembling Sorbet Set Hopper Hopper ⑤ Assembly Guide Assembly Guide Auger Auger ④ Remove the extraction insert in the Auger Seal Auger Seal discharge cover. 1. When making sorbet, remove the extraction insert. 2. Do not remove the extraction seal. Sorbet Strainer Sorbet Strainer ③...
Page 17
Assembly Guide with Main Body is on page 16. Chamber Chamber Sorbet Sorbet strainer strainer Discharge Cover Discharge Cover Make sure the discharge cover (①) of the Place the sorbet strainer in the chamber. chamber is properly fastened with the loop. Wiggle the strainer left and right until the 1.
How to Assemble: Chamber Set and Main Body ② ① Fit chamber set to main body. Assemble the chamber set to main body before plugging it in. Use the juice cup (①) and pulp container (②) when making juice. Use the pulp container (②) under the pulp outlet when making sorbet. Sorbet comes out through the pulp outlet.
Using Power Dial / If Auger Jams Using Power Dial ① Turn right to start juicing, set in the middle to stop, and turn left to reverse. ② To protect the motor, it doesn’t stop immediately, but slows to a stop. [ ③...
How to Use: Making Juice / Sorbet [ON] 30 [ON] 30 > [REV] 5 > [REV] 5 > [ON] 30 > [ON] 30 " " " " " "...
Page 21
How to Use: Making Juice / Sorbet Make sure the discharge cover is closed properly. ① The amount and speed of pulp being discharged depends on the firmness of the produce being juiced. When making juice, be sure that the extraction seal and insert are properly assembled and the discharge cover is closed with the loop.
Disassembly and cleaning After the motor has completely stopped, unplug ※ the power cord with dry hands. Remove the chamber set from the main body. Twist the hopper to open and lift up in order to disassemble the unit. Use a cleaning brush and wash the chamber set under running water.
Disassembling and Washing Silicon Parts (Seals degrade over time and should be replaced every year. You can purchase additional seals from your authorized Sana distributor.) Assembling and disassembling the auger seal. (Improper assembly can damage the seal) Turn over the auger, and remove...
Troubleshooting If the following steps do not solve the problem, contact your retailer or authorized Sana distributor. The juicer makes a This is normal, and is caused by the chamber set locking into place. “click” sound when I turn it on.
Product Specifications / Warranty Product Specifications Sana Slow Juicer ProductName Rated Operating Hour Maximum 30 minutes Model Name Cord Length 1.4 m 230-240 V Rated Voltage Motor Single-phase induction motor Fuse 250 V 5 A 50 Hz Rated Frequency Dimensions...