Beper P202ASP200 User Instructions page 9

EN
Vacuum Cleaner Use instructions
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable mate-
rials, gases or burning flames.
Do not allow children, disabled people or every pe-
ople without experience or technical ability to use
the appliance if they are not properly watched over.
Close supervision is necessary when any appliance
used by or near children.
Warnings for use
Do not use the product outdoors or on wet surfaces.
Do not use the product to vacuum flammable substances such as hot
ash and cigarettes.
Do not use the appliance to vacuum up needles, tacks or pointed
objects.
Check that there are no obstructions due to hair, fabric or other ma-
terials.
Product description Fig.A
1. Floor brush
2. Tube
3. Handle
4. Air regulator
5. Flexible hose
6. Hose connector
7. Cable winding button
8. Dust tank release button
9. ON/OFF button
10. Dust tank
11. 2in1 accessory nozzle and brush
Assembly
Attention: Always disconnect the plug from the socket before installing or removing accessories.
Insert the flexible tube into the air intake duct on the appliance until you hear a click (Fig.B).
To release the hose, press the two buttons at the end of the hose itself.
Connect the two portions of rigid tube to the hose and finally insert the floor brush or the 2in1 accessory for
nozzle and brush.
Instructions for use
Before using the appliance, unwind the length of the cable and insert the plug into the socket. A yellow mark on
the power cable indicates the ideal cable length, do not extend the cable beyond the red mark.
Press the ON/OFF button to turn on the product.
9