Positioning Of The Trap - Biogents Sentinel Instruction Manual

Power Supply and Electricity
The suction fan requires a power source of 9 to 12 V DC (max. 280 mA). An optional
power supply unit (EU Version 220V input, 12V output) with fitting plug connection is
available. There are also extension cords, battery mounting support cables, and extra
plug connections available. Please refer to our Product Catalog.
When using batteries, we usually recommend 12 Volt motorcycle or car batteries.
These are easily rechargeable and readily available in most places. As a rule of thumb,
you will need a battery capacity of 10 to 11 Ah for each trap with a 24 hr trapping peri-
od (for a 48 hr period you will need a capacity of 20 to 22 Ah and so on). This includes
a security factor which should give you a peace of mind in most real-life situations.

Positioning of the Trap

The correct placement of the trap is an important factor that heavily influences its
effectiveness.
Outdoor Use (the trap can be operated with or without CO
Position the trap in a location that is sheltered from wind, heavy rainfall*, and direct
sunlight.
Not in wind
NOTE: The trap should not be placed too close to walls (min. distance of approx. 1 meter)
Optimal Positioning:
•
Ideal locations to position the trap are close to resting areas of mosquitoes such
bushes, shrubs, hedges, or any other foliage; however placing the trap in very tall
grass or under bushes will impair its effectiveness.
•
The trap should also be positioned close to mos-
quito breeding sites such as various kinds of tem-
porary stagnant water ranging from small lakes
to collections of rain water in rain barrels or old
tyres. Many mosquitoes do not need a large
amount of water for breeding; even a can filled
with rain water can be an ideal breeding place.
6
Not in heavy rainfall
*Rainfall will not damage the trap as long as the fan is switched on.
):
2
Not in direct sunlight
as