CONNECTING THE DVD TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS
CONNECTING THE DVD TO A TV USING THE S-VIDEO OUTPUT JACK
NOTES:
•
If your TV has a Component input, connect the DVD player with the component cable for best results, otherwise use the
S-Video or Video OUT jack on the DVD player.
•
Set the TV's TV/VIDEO button or switch to the VIDEO setting.
•
When connecting the DVD, refer to the owner's manual of the TV, as well as this manual.
•
When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any
connections.
•
If your TV only has one audio input, the use of a "Y" connector may be necessary. Visit your local electronics supply store.
•
Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
CONNECTION
Audio Cable (Included)
Video Cable (Included)
From
Audio
From
Out
Video Out
Audio Cable (Included)
S-Video Cable (Not Included)
From
From
Audio
S-Video
Out
Out
9
To
To
Video In
Audio In
To
To S-Video In
Audio In