Connection; Connecting The Dvd To A Tv Using The Audio/Video Output Jacks; Connecting The Dvd To A Tv Using The S-Video Output Jack - Memorex MVD2032 User Manual

CONNECTING THE DVD TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS

CONNECTING THE DVD TO A TV USING THE S-VIDEO OUTPUT JACK

NOTES FOR CONNECTING TO A TV:
• If your TV has an S-Video input, connect the DVD player with the S-Video cable for best results.
• When connecting the DVD, refer to the owner's manual of the TV, as well as this manual.
• When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any connections.
• If your TV only has one audio input, the use of a "Y" connector may be necessary. Visit your local electronics supply store.
• Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
• Set the VIDEO OUT Option (on the GENERAL MENU Page) to S-VIDEO if using S-Video.
• After connecting, press the AUDIO MODE button to the desired audio setting.
Audio Cable (Included)
Video Cable (Included)
From
Audio
From
Out
Video Out
Audio Cable (Included)
S-Video Cable (Not Included)
From
From
Audio
S-Video
Out
Out

CONNECTION

To
To
Audio In Video In
To
To S-Video In
Audio In
9