Contents...1 Important Safety Instructions ...2 Precautions...5 Power Source ...5 Location of Controls ...6 • Front...6 • Rear ...6 • Remote ...7 Remote Control ...8 • Battery Installation ...8 • Effective Distance of the Remote Control Transmitter ...8 Connection...9 • Connecting the DVD to a TV Using the Audio/Video Output Jacks ...9 •...
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This Caution Marking is located at the bottom enclosure of the unit. The symbol for class II (Double Insulation) CAUTION:...
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR TO MEMOREX. Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit.
15. OVERLOADING Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 16. OBJECT AND LIQUID ENTRY Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock.
NOTES ON HANDLING: • When shipping the DVD player, always use the original shipping carton and packing materials. For maximum protection, repack the unit as it was originally packed at the factory. • Do not use volatile liquids, such as insect spray, near the DVD player.
FRONT 1. PLAY (®) Button 2. OPEN/CLOSE Button 3. Disc Compartment 4. STANDBY/STOP Button To return to the Standby mode while the unit is on, press and hold the STANDBY/STOP button for two seconds then release; the unit will be turned off and the Standby indicator will light on.
BATTERY INSTALLATION Follow these precautions when using a battery in this device: 1. Use only the size and type of battery speciﬁed. 2. Be sure to follow the correct polarity when installing the battery as indicated in to the Battery Compartment. Reversed batteries may cause damage to the device.
CONNECTING THE DVD TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS CONNECTING THE DVD TO A TV USING THE S-VIDEO OUTPUT JACK NOTES: • If your TV has a Component input, connect the DVD player with the component cable for best results, otherwise use the S-Video or Video OUT jack on the DVD player.
CONNECTING THE DVD TO A TV USING THE Y/P NOTES FOR CONNECTING TO A TV: • TV must have Y, P and P input jacks. • Set the TV’s TV/VIDEO button or switch to the VIDEO setting. • When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual. •...
CONNECTING THE DVD TO A HOME THEATER SYSTEM From Digital Out From Coaxial Cable (Not Included) Video Out Video Cable (Included) 1. Front Left Speaker 2. Television 3. Center Speaker–can be located on top or below the television. 4. Sub-woofer–can be located anywhere in the room. 5.
ABOUT DISCS The region number for this DVD Player is: See the following page for information regarding region numbers. PLAYABLE DISCS: The following discs can be played back on this DVD player: KODAK PICTURE CD VIDEO VIDEO When playing an MP3, the TV screen will list the folders/tracks. MP3 is the abbreviation of “MPEG1 Audio Layer 3”.
ABOUT DISCS (CONTINUED) Notes on Copyright: It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public and rent copyrighted material without permission. DVD video discs are copy protected, and any recordings made from these discs will be distorted. This product incorporates copyright protection technology that is protected by method claims of certain U.S.
SETUP MENU The Setup menu lets you customize the DVD player by allowing you to select various language preferences, turn captions and screen saver on and off, adjust what type of television screen you have and more. Below, find the menu, and then find the corresponding page that describes the features of the selected menu option.
GENERAL SETUP MENU: Select General and then select the desired option using the Navigation (√,®,π,†) buttons to navigate through the menus/screens and press the ENTER/PLAY (®) button to select. TV DISPLAY NORMAL/PS: Pan Scan. Select when the unit is connected to a conventional TV.
SPEAKER SETUP MENU: Select Audio and then select the desired option using the Navigation (√,®,π,†) buttons to navigate through the menus/screens and press the ENTER/PLAY (®) button to select. DOWNMIX Sets the Audio Output mode. LT/RT: Select to hear the sound in theatrical downmix mode.
PREFERENCE MENU (this menu cannot be accessed if a disc is inserted): Select Preference and then select the desired option using the Navigation (√,®,π,†) buttons to navigate through the menus/screens and press the ENTER/PLAY (®) button to select. AUDIO General Audio Dolby - - Preference Page - -...
When “ ” appears while pressing a button, this means that the corresponding function cannot be performed either on the disc inserted, or in the selected MUTE Press the MUTE button once to mute the sound, “MUTE” will appear on the TV screen. Press the MUTE button again to restore the sound;...
IMPORTANT NOTES: • After plugging in, the unit will be in the Standby mode (the Standby indicator will be lit). Press the STANDBY ON/OFF button to turn on the unit. • “ ” will appear on the TV screen during operation if you try to access a function that is not available on the disc. •...
DVD BASIC OPERATION (CONTINUED) SKIP Press the Navigation/SKIP N button 1 to advance the DVD to the beginning of the next chapter. Press the Navigation/SKIP o button 2 to move the DVD to the beginning of the previous chapter. PAUSE AND STEP Press the PAUSE/STEP button 1 to pause the picture.
TITLE/CHAPTER SEARCH Use this feature to directly go to a specific title and/or chapter. Press the SEARCH button 1 once. Press the Navigation (√,®) buttons 2 to select the Title (“TT”), then use the Number buttons 3 to select the desired title number (i.e. for number 5, press “0”, “5”).
AUDIO Press the AUDIO button repeatedly to change the audio language. This feature is not available on all discs. DVD MENU Press the DVD MENU/PBC button 1 and the Main Menu of the disc will appear. Use the Navigation (√,®,π,†) buttons 2 to select the desired option, and then press the ENTER/PLAY (®) button 3.
PLAYBACK OF AN MP3 DISC Press the STANDBY ON/OFF button to turn on the unit; the STANDBY/ON indicator will go out. Press the OPEN/CLOSE button 1 to close the disc tray. “CLOSE” will appear on the screen and the display. After loading, the FOLDER/TRACK menu will appear on the screen.
SELECTING FOLDERS/TRACKS USING THE SKIP O O OR N N BUTTON During playback, simply press the Navigation/SKIP N 1 or o 2 button to select a track to be played. FORWARD®®/REVERSE √√ Each press of the SEARCH ®® 1 or √√ 2 button will increase the search as follows: 1st press: 2nd press:...
PLAYBACK OF A CD/VCD Press the STANDBY ON/OFF button to turn on the unit; the STANDBY/ON indicator will go out. Press the OPEN/CLOSE button to close the disc tray. “CLOSE” will appear on the screen. After loading, playback will start automatically. SELECTING TRACKS/FILES USING THE NUMBER BUTTONS Press the Number buttons corresponding to the track...
CD/VCD BASIC OPERATION (CONTINUED) FORWARD®®/REVERSE √√ Each press of the SEARCH ®® 1 or √√ 2 button will increase the search as follows: 1st press: 2nd press: 3rd press: 4th press: x 16 5th press: Resume Normal Playback IMPORTANT NOTE ON VCD REPEAT PLAYBACK: PBC must be Off to use Repeat playback with VCDs.
PBC (VCD ONLY) When playing a VCD with PBC function, you can enjoy simple interactive software on your TV. The PBC Function will activate automatically if the VCD has this function. To turn off the PBC, press the DVD MENU/PBC button 1 once. Press the Navigation/SKIP n button 2 to go to the Track Selection Menu.
Press the STANDBY ON/OFF button to turn on the unit; the STANDBY/ON indicator will go out. Press the OPEN/CLOSE button 1 to close the disc tray. “LOADING” will appear on the TV screen. After loading, playback will start automatically. Press the Navigation/SKIP n or o button 2 to skip through the pictures. If playback does not start automatically, press the Navigation (π,†) button 3 to select the desired picture and then press the ENTER/PLAY (®) button 4 to begin playback.
Check the following before requesting service: SYMPTOM GENERAL No power. Power on, but unit not functioning properly. No picture. No sound. Playback picture rolls. The playback picture is poor. The Search feature is not working. The picture is not fitting properly. The remote control is not working.
WWW.MEMOREXELECTRONICS.COM OR CONTACT CUSTOMER SERVICE AT PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX. FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-800-321-6993.
Caring for Discs • Treat the disc carefully. Handle the disc only by its edges. Never allow your ﬁngers to come in contact with the shiny, unprinted side of the disc. • Do not attach adhesive tape, stickers, etc. to the disc label. •...
Power Requirements...AC120V, 60Hz Power Consumption ...<15W (approx. 5W when set to Standby mode by remote) Weight...3 Lbs Dimensions ...14.2 (L) x 8.5 (W) x 1.8 (H) inches Weight and dimensions are approximate. Signal System ...NTSC/PAL Operating Temperature ...41° to 95°F Operating Humidity Range...5% to 90% (no condensation) Discs Played: DVD-VIDEO Disc...
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www.memorexelectronics.com...