Installing The Front Fan - Dometic CCF-T Installation Manual

INSTALLING THE FRONT FAN

Hold the front fan vertically by the housing.
1. Insert the front fan into the new 3.5 in. (89 mm) opening inside the
console bin until it snaps into place.
2. Tape the black fan wire to the top right lip of the console bin to hold it in
place and to protect it from damage.
INSTALLING THE FOAM SPACERS
1. Peel off the tape covering from the right-hand foam spacer.
2. Affix the right-hand foam spacer to the inside of the right-hand console
bin wall:
a. Hold the foam spacer inside the console bin with the 45 degree
angled corner to the rear of the console bin.
b. Rest the foam spacer on the console bin ledge.
c. Press the 45° angled corner of the foam spacer into the rear corner.
d. Press the entire foam spacer into place.
3. Repeat steps 1 and 2 to apply the left-hand foam spacer to the left-hand
console bin wall.
INSTALLING THE REFRIGERATOR UNIT
INSTALLING THE R/S WIRE SET
1. Remove the connector C2280C from the BCM which is located behind the Glove box.
Dometic CCF-T Ford Expedition 2022 Installation Manual/ 2022-03-03/ Page 7 of 15
Front Fan
Black Fan Wire
Foam Spacer
Console Bin Ledge